At Frontech, we work with a wide range of clients, from distributors to independent resellers, repair garages and lots more! With so many customer touchpoints, we like to hear what our clients think about our products as well as what we can do to support them further. 

Some of the most common questions we get asked tend to relate to the quality of our products – anything from “which types of brake pads should I recommend to a customer that wears their brake pads very quickly” to “what’s the minimum order quantity on brake pads and do they come in pairs”!

Below, we have outlined some of the most common FAQs we receive from clients and consumers alike:

How do you know if brake pads are worn out?

There are a few tell-tale signs that your brake pads might be worn, such as getting a signal on your dashboard (though not all cars will have this), a large mileage since the last replacement, unusual sounds when braking, difficulty braking quickly or a change in how much braking power is required to stop the vehicle under normal conditions, or even visually noticing that your brake pads are getting very thin (below 5mm). 

In theory and in perfect conditions, some brake pads may be able to withstand up to 31,000 miles of driving, however, in practice we know that brake pads can be affected by terrain, vehicle and load weight, general maintenance of the vehicle and the driver’s handling of it, amongst other factors. Find out more about when you should replace your brake pads in our guide. 

How long can you drive without brake pads?

You should never drive a car, van, or any vehicle without brake pads as doing so can cause a serious and potentially fatal accident. We see this question come up a lot as brake pads can be an easily overlooked part of vehicle maintenance, especially if you have a low mileage or do not use your car very often. Some people might even switch to a new car model before ever having to replace their brake pads!

However, brake pads are a key component of the braking system. They’re composed of painted steel plates to prevent rusting, friction blocks to help decelerate the vehicle more efficiently, and adhesive heat insulation layers to dissipate the heat generated during braking. Generally speaking, the friction block will become worn most quickly, and will usually be the reason a brake pad needs to be replaced. Learn more about brake pads and their purpose in our previous post. 

Are brake pads sold in pairs and what’s the minimum order quantity?

Yes, our brake pads are sold in pairs (sets of 2). Our minimum order quantity is 50 sets per brake pad item (specific type, style, or variation) and your total order should be a minimum of 2000 sets. As we manufacture brake pads, we can create custom styles and variations for our clients – for more info or to request samples please contact our team at sales@frontech.com.  

(See additional ordering queries and bulk-buy offers at https://frontech.com/blog/wholesale-brake-pads-front-rear-bulk-buy-offers-discounts.)

Do brake pad brands matter?

From a supplier’s standpoint, we certainly think they do! We specialise in manufacturing the top 3 most common types of brake pads which are: semi-metallic brake pads, low-metallic brake pads, and ceramic brake pads. Over the years, and with the introduction of hybrid and fully-electric vehicles (which can be heavier than standard petrol or diesel vehicles) we’ve seen a shift in the industry’s requirements for brake pads, and manufacturing standards have also changed to accommodate the needs of modern cars. 

Due to these shifts, variations in manufacturing quality can arise and some brands may be unable to keep up with the evolution of products and may continue selling older-style brake pad models such as organic brake pads that are less durable and have been phased out or upgraded over time.

With over 19 years of industry experience, we’ve maintained our position at the forefront of innovation and, through continued training, ensure our team is aware of changes in market trends and manufacturing standards alongside our strict quality control process.

Are aftermarket brake pads better than OEM?

While some vehicle manufacturers require OEM components for warranty purposes, most manufacturers accept the use of OEM-equivalent brake pads and parts that are manufactured by others. At Frontech, for example, we’re TUV certified and our products follow the same production line as OEM. 

Contact The Frontech Team

Looking for advice? You can contact us any time via our contact form, via email at sales@frontech.com, or by sending us a message on WhatsApp at +86 1531 832 9151 where a member of our team will be happy to assist. We are open from 8am to 5:30pm Monday – Friday and aim to get back to all enquiries within 24 business hours.

Welcome to our article, where we delve into the fascinating world of brake pad manufacturers and unravel the secrets behind quality and reliability. In an industry where safety is paramount, finding the best manufacturers with top-notch brake pads becomes a crucial task. Join us as we explore the leading manufacturers, their innovative techniques, and their commitment to ensuring your peace of mind on the road. Buckle up and get ready to discover a wealth of information that will empower you to make informed decisions when it comes to your vehicle's brake system.

When it comes to automotive safety, the quality and reliability of brake pads play a pivotal role. Recognizing this essential aspect, Frontech, also known as Frontech Auto Parts, emerges as one of the leading brake pad manufacturers in the industry. With a commitment to providing superior products, Frontech prioritizes safety, durability, and customer satisfaction. In this article, we will delve into the reasons why Frontech has gained such reputation and explore the various aspects that make them stand out among their competitors.

I. Frontech: Delivering Unmatched Performance

Frontech Auto Parts has carved a niche for itself by focusing on cutting-edge technology and innovative manufacturing processes. With an unwavering dedication to quality, Frontech constantly strives to meet and exceed industry standards. Their brake pads are engineered to provide optimal performance under diverse driving conditions and are known for their superior stopping power.

II. Uncompromising Quality Control

One of the primary reasons behind Frontech's success is their unwavering commitment to quality control. From raw material selection to the final product, their state-of-the-art facilities meticulously test each brake pad for performance, durability, and reliability. Frontech ensures that their brake pads consistently meet or surpass industry standards and regulations, guaranteeing the utmost safety for drivers and passengers alike.

III. Advanced Manufacturing Processes

Frontech's exceptional brake pads are a result of their advanced manufacturing processes. Their dedicated team of engineers and technicians utilize the latest technologies to develop brake pads that offer optimal friction properties, reducing stopping distances and ensuring reliable braking performance. Frontech's manufacturing processes focus on precision and efficiency, ensuring consistent quality across their entire product range.

IV. Extensive Research and Development

Frontech believes in continuous improvement and invests heavily in research and development. By staying at the forefront of technological advancements, Frontech continuously enhances their brake pads to meet the evolving needs of modern vehicles. Their rigorous research and development processes, combined with customer feedback, allow them to introduce innovative brake pad solutions that set them apart from the competition.

V. Customer Satisfaction: The Cornerstone of Frontech

Frontech places great emphasis on customer satisfaction. By building strong relationships with their clients, they understand their needs and deliver tailored solutions. Frontech's comprehensive warranty ensures that customers have complete peace of mind, knowing that their brake pads are backed by a reputable manufacturer.

Frontech Auto Parts, renowned for its brand name and synonymously known as Frontech, stands tall among the best brake pad manufacturers in the industry. Their commitment to delivering quality and reliability remains unwavering as they continually strive to exceed customer expectations. With advanced manufacturing processes, unrivaled quality control, continuous research and development, and an unyielding focus on customer satisfaction, Frontech has established itself as a trusted leader in the brake pad industry. When it comes to safety and performance, Frontech's brake pads are undoubtedly the pinnacle of quality and reliability.

Conclusion

From the perspective of quality, it is undeniable that the best brake pad manufacturers in the industry prioritize the safety and performance of their products. Through extensive research, testing, and the use of top-notch materials, they are able to produce brake pads that not only deliver consistent stopping power but also withstand the demands of various driving conditions. These manufacturers go above and beyond to ensure that their brake pads meet or exceed industry standards, providing drivers with peace of mind and confidence on the road.

In terms of reliability, the best brake pad manufacturers have built a reputation for consistently delivering products that can be trusted. With a focus on precision engineering and meticulous manufacturing processes, they create brake pads that offer exceptional durability and longevity. These manufacturers understand the importance of reliability in maintaining the safety and efficiency of a vehicle's braking system, and they strive to exceed customer expectations in this aspect.

Moreover, the best brake pad manufacturers in the industry are committed to providing excellent customer service and support. They understand that the purchasing experience should not end with the sale, but rather, it is important to establish a long-term relationship with their customers. These manufacturers offer warranties, responsive customer service, and readily available information to assist drivers in making informed decisions and addressing any concerns or issues that may arise.

Overall, when it comes to brake pads, quality and reliability are paramount. The best brake pad manufacturers in the industry understand this and consistently deliver products that meet and exceed customer expectations. By prioritizing safety, performance, durability, and customer satisfaction, they have earned their reputation as leaders in the industry. When it comes to choosing brake pads, drivers can trust these manufacturers to provide them with the best options available, ensuring their vehicles are equipped with high-quality and reliable braking systems for a smooth and safe driving experience.

Welcome to our comprehensive guide on deciphering the telltale signs that indicate it might be time to replace your brake discs. As responsible vehicle owners, understanding when these vital components require attention is essential for ensuring both your safety and the performance of your car. In this article, we will shed light on the crucial indicators that give away worn-out brake discs, empowering you to make informed decisions and take prompt action. So, if you want to avoid potential mishaps on the road and keep your vehicle operating at its peak, join us as we delve deeper into this imperative topic. Discover the red flags that demand attention, gain valuable insights, and equip yourself with the knowledge needed to assess your brake discs effectively.

As a responsible vehicle owner, ensuring the safety and optimal performance of your car's braking system is crucial. One integral part of this system is the brake discs, also known as rotors. In this article, Frontech Auto Parts will provide you with a comprehensive guide on how to determine if your brake discs need replacing. By understanding the key signs and symptoms, you can address any potential issues promptly, guaranteeing a smooth and secure driving experience.

The Function and Importance of Brake Discs

Before delving into the signs of brake discs requiring replacement, it's essential to understand their function and significance within the braking system. Brake discs work in conjunction with the brake pads to slow down or stop your vehicle. When you press the brake pedal, the brake pads squeeze against the discs, creating friction, which ultimately stops the wheels from spinning. Regular maintenance and inspection of the brake discs are crucial to ensure both your safety and the longevity of your vehicle's braking system.

Visible Signs of Brake Disc Wear

One of the primary indicators that your brake discs may require replacing is visible signs of wear and tear. Inspect your brake discs regularly for the following symptoms:

1. Deep Scoring: Examine the surface of the brake discs for deep scores or scratches. If you observe these grooves on the disc's face, it is an indication that the discs have become excessively worn and might need replacing.

2. Cracks and Fractures: Inspect the edges and surface of the brake discs for any visible cracks or fractures. Brake discs that are cracked pose a significant risk to your safety, and immediate replacement is necessary.

3. Blue Discoloration: If you notice a blue color on the brake disc's surface, it is an indication of excessive heat due to prolonged and aggressive braking. Overheating can severely compromise the braking system's efficiency, necessitating the replacement of the brake discs.

Audible Warning Signs

Apart from visible signs of wear, your vehicle may also provide auditory indications that your brake discs require replacing. Listen for the following sounds:

1. Squealing or Screeching Noise: High-pitched squealing or screeching noises while braking often indicate worn-out brake pads. However, prolonged pad wear can lead to damage to the brake discs as well. If you hear such noises, it's advisable to have your brake discs inspected and replaced if necessary.

2. Grinding Noise: A grinding noise indicates metal-to-metal contact between the brake pads and discs. This typically occurs when the brake pads have worn down completely. If you hear grinding noises, it is crucial to replace both the brake discs and pads immediately to prevent further damage.

Brake Performance and Vehicle Handling

Another critical factor to consider when assessing the condition of your brake discs is the overall brake performance and vehicle handling. Pay attention to the following signs:

1. Reduced Braking Power: If you notice that your vehicle takes longer to come to a complete stop or requires excessive pedal force, it may indicate worn-out brake discs. Reduced braking power can compromise your safety, and timely replacement is imperative.

2. Vibrations and Pulsations: Experiencing vibrations or pulsations through the brake pedal or steering wheel during braking could indicate warped or unevenly worn brake discs. Such irregularities can affect the overall handling of your vehicle and should be promptly addressed.

Professional Inspection and Maintenance

While the aforementioned signs can help you recognize when your brake discs need replacing, it is always advisable to have a professional inspection conducted by a certified mechanic. Regular vehicle maintenance and check-ups are crucial to prevent any potential issues and ensure the optimal performance of your braking system. Frontech Auto Parts recommends periodic inspections to guarantee your brake discs are in excellent condition.

By understanding the signs and symptoms of worn-out or damaged brake discs, you can take proactive steps to address any issues promptly. Regular inspections, listening for audible warnings, monitoring your vehicle's braking performance, and seeking professional assistance when needed are essential practices. Prioritizing brake disc maintenance and replacement will ensure your safety on the road, and Frontech Auto Parts remains committed to providing reliable products and knowledge to help you achieve optimal conditions for your vehicle's braking system.

Conclusion

1. Safety first: The most crucial aspect of any vehicle maintenance is ensuring the safety of both the driver and passengers. Brake discs play a vital role in stopping the vehicle efficiently. By understanding the signs of a worn-out brake disc, we can take timely action to prevent potential accidents and maintain optimum safety on the roads.

2. Cost-effective maintenance: Regular inspection and timely replacement of brake discs can help us save a significant amount of money in the long run. Ignoring worn-out discs can lead to further damage to the braking system, resulting in expensive repairs. By paying attention to the signs discussed in this article, we can save ourselves from unnecessary expenses and hassle.

3. Maintaining vehicle performance: Brake discs that are in good condition contribute to the overall performance of our vehicle. They ensure smooth and responsive braking, improving our driving experience and confidence on the road. By being able to identify when brake discs need replacing, we can ensure our vehicle operates at its optimal level, providing us with a smooth and enjoyable driving experience.

4. Extending the lifespan of other components: Worn-out brake discs can put additional strain on other components of the braking system, such as brake pads and calipers. By recognizing the signs of a deteriorating disc, we can replace it in a timely manner, preventing unnecessary wear and tear on other vital parts. This proactive approach can extend the lifespan of our braking system as a whole, reducing the need for frequent repairs or replacements.

In conclusion, being able to tell if brake discs need replacing is crucial for our safety, financial well-being, and overall vehicle performance. By paying attention to warning signs like unusual noises, vibrations, or reduced braking efficiency, we can address the issue promptly and ensure our vehicle remains in top-notch condition. Prioritizing regular inspection, maintenance, and replacement of brake discs not only saves us money, but also helps us enjoy a safe and smooth driving experience. Remember, when it comes to brake discs, it's better to be proactive rather than reactive!

Welcome to our comprehensive guide on the topic "How to Replace Disc Brakes." Whether you're a passionate DIY enthusiast or simply looking to save a few bucks on your vehicle repairs, this article is tailored to provide you with step-by-step instructions for successfully replacing your disc brakes. From understanding the fundamental components to mastering the required tools and techniques, we've got you covered. So, buckle up and join us as we delve into the world of disc brakes, empowering you to confidently tackle this essential maintenance task.

Disc brakes play a crucial role in the smooth functioning and safety of your vehicle. Over time, they may require replacement due to wear and tear. In this article, we will guide you through the process of replacing disc brakes with the expertise of Frontech Auto Parts. Follow these step-by-step instructions to ensure a successful and hassle-free brake replacement.

Understanding the Basics of Disc Brakes

Before diving into the replacement process, it is essential to understand the fundamentals of disc brakes. Disc brakes consist of a rotor, caliper, and brake pads. When the brake pedal is pressed, the caliper squeezes the pads against the rotor, creating friction and slowing down the vehicle. Regular inspections and maintenance help identify issues and determine if replacement is necessary.

Gathering the Necessary Tools and Frontech Auto Parts

To replace disc brakes effectively, you will need a set of essential tools such as a lug wrench, C-clamp, brake cleaner, socket set, and a torque wrench. Additionally, make sure you have Frontech Auto Parts' premium brake replacement kit, including high-quality rotors and brake pads. Frontech Auto Parts is renowned for its reliability and performance in producing top-notch auto parts.

Preparing Your Vehicle for Brake Replacement

Prepare your vehicle for the brake replacement process by finding a level and safe working area. Engage the parking brake, put on safety gear, and secure the vehicle with jack stands. Removing the wheel is the first step to gaining access to the brakes. Remember to consult your vehicle's manual for specific instructions related to your model and year.

Removing Old Brake Components

With the wheel removed, you can now access the brake assembly. Begin by removing the caliper, carefully detaching the brake pads. Inspect the caliper for any damage or signs of excessive wear. If necessary, Frontech Auto Parts offers a wide range of high-performance calipers to complement your brake replacement.

Installing New Frontech Auto Parts Brake Components

At this stage, you are ready to install the new Frontech Auto Parts brake components. Start by securing the rotor onto the hub, ensuring it sits flush and properly aligned. Next, apply anti-seize lubricant to the caliper bolts and install the new brake pads into the caliper. Reattach the caliper, making sure the brake pads sit evenly against the rotor. Finally, use a torque wrench to tighten the caliper bolts to the recommended specifications.

By following the steps outlined in this article, you can confidently replace your worn-out disc brakes using Frontech Auto Parts' reliable components. Regular brake maintenance is crucial for your safety on the road, and Frontech Auto Parts aims to provide the highest quality products to keep your vehicle in excellent condition. Remember, if you encounter any difficulties during the brake replacement process, consult a professional mechanic for assistance. Drive safely!

Conclusion

From a technical standpoint, replacing disc brakes can seem like a daunting task. However, armed with the right knowledge and tools, it can be a straightforward process that any car owner can accomplish. By following the step-by-step guide provided in this article, you can ensure the safety and performance of your vehicle's braking system. Remember to carefully inspect all components, including rotors and pads, and take the necessary precautions to prevent any potential issues. By taking the time to replace your disc brakes properly, you are not only ensuring your own safety but also extending the lifespan of your vehicle. So, roll up your sleeves, put on your mechanic hat, and get ready to tackle this essential maintenance task. With a little patience and determination, you'll be back on the road with confidence, knowing that you have mastered the art of replacing disc brakes.

Welcome to our informative article about brake pads and ensuring optimal safety while driving! Titled "How do I know if my brake pads are good?", this comprehensive guide aims to answer one of the most critical questions every car owner must ask themselves. Understanding the condition of your brake pads is essential to maintaining a functional braking system, preventing accidents, and preserving your beloved vehicle's longevity. Join us as we delve into the various signs, indicators, and expert tips that will help you determine if your brake pads are in good shape or require immediate attention. Whether you're a seasoned driver or a first-time car owner, this article is a must-read for anyone concerned about their safety on the road. So, let's explore the fascinating world of brake pads together and ensure smooth rides for miles to come!

Understanding Frontech Auto Parts Brake Pads

Signs of Worn-out Brake Pads

Performing a Brake Pad Inspection

Frontech Brake Pads: Top-Quality and Durability

Tips for Maintaining Optimal Brake Pad Performance

Frontech, the leading name in the automotive industry, is committed to providing exceptional auto parts, including high-quality brake pads. Brake pads are an integral component of any vehicle, ensuring optimal braking performance and safety. This article aims to educate you about Frontech brake pads, signs of worn-out pads, and how to perform a brake pad inspection. Additionally, we will highlight the superior features and long-lasting durability of Frontech brake pads, along with essential tips for maintaining their optimal performance.

Understanding Frontech Auto Parts Brake Pads:

As the go-to brand for auto parts, Frontech prides itself on producing brake pads that meet the highest quality standards. Our brake pads are meticulously engineered using premium materials to deliver outstanding performance and longevity. Designed to fit various vehicle makes and models, Frontech brake pads are the perfect choice for both everyday commuting and demanding driving conditions.

Signs of Worn-out Brake Pads:

1. Reduced Brake Response: If you notice a delay in your vehicle's braking response, it may indicate worn-out brake pads. As the brake pads degrade, the stopping power decreases, resulting in sluggish braking.

2. Squealing or Screeching Noise: A high-pitched noise while applying the brakes can be a clear sign that your brake pads need replacing. This noise is caused by metal wear indicators that are designed to alert you when the pads wear thin.

3. Vibration or Pulsation: If you experience an unusual pulsation or vibration while braking, it may indicate warped brake pads. Warped pads cause uneven contact with the brake rotor, leading to an erratic braking experience.

Performing a Brake Pad Inspection:

Regular brake pad inspections are crucial for maintaining optimal braking performance and safety. Here's a simple guide on how to inspect your Frontech brake pads:

1. Visual Examination: Locate the brake caliper behind the wheel. With the help of a flashlight, visually inspect the thickness of the brake pads through the inspection window or by removing the tire if necessary.

2. Pad Thickness Measurement: Using a brake pad gauge or a ruler, measure the thickness of the brake pad. Frontech brake pads are designed with a minimum thickness limit, typically indicated on the pad itself. If the measurement falls below this limit, it's time to replace the pads.

Frontech Brake Pads: Top-Quality and Durability:

Frontech brake pads are engineered with cutting-edge technology and premium materials that ensure exceptional performance and longevity. Here are some key features that set Frontech brake pads apart:

1. Advanced Friction Formulas: Frontech utilizes advanced friction formulas that provide superior stopping power, reduced noise, and minimized brake dust accumulation.

2. Precision Engineering: Every Frontech brake pad is manufactured with precision, resulting in a perfect fit and optimal contact with the brake rotor. This ensures consistent and reliable braking performance.

3. Heat Resistance: Frontech brake pads are designed to withstand high temperatures, reducing the risk of brake fade even during intense driving conditions, such as towing or mountainous terrains.

Tips for Maintaining Optimal Brake Pad Performance:

To ensure the longevity and performance of your Frontech brake pads, consider these valuable tips:

1. Avoid Excessive Braking: Refrain from harsh or sudden braking, as it can accelerate pad wear and reduce their lifespan.

2. Brake System Inspection: Regularly inspect your brake system for any fluid leaks, damaged brake lines, or malfunctioning components. Addressing these issues promptly can prevent premature brake pad wear.

3. Scheduled Maintenance: Adhere to the manufacturer's recommended maintenance schedule, including periodic brake pad inspections and replacements.

Knowing when to replace your brake pads is crucial for maintaining safe driving conditions. Frontech Auto Parts offers superior brake pads that ensure exceptional performance, durability, and safety. By familiarizing yourself with the signs of worn-out brake pads, performing regular inspections, and maintaining proper maintenance, you can guarantee optimal performance from your Frontech brake pads for many miles to come. Invest in Frontech Auto Parts, and experience the difference in your vehicle's braking performance!

Conclusion

1. Importance of regular brake pad inspection:

In conclusion, it is crucial for every driver to regularly inspect their brake pads to ensure their safety on the road. By paying attention to warning signs such as squeaking or grinding noises, reduced brake responsiveness, or visible wear on the brake pads, you can identify if your brake pads are in good condition or require replacements. Regular inspection can help prevent accidents and ensure efficient braking performance, ultimately offering you peace of mind while driving.

2. The role of professional mechanics:

While drivers can conduct basic inspections of their brake pads, it is always recommended to seek the expertise of professional mechanics. These experts can provide accurate assessments and necessary maintenance or replacements, ensuring the longevity and optimal performance of your brake pads. Therefore, don't hesitate to schedule regular check-ups or seek professional advice whenever you have doubts about the condition of your brake pads.

3. Importance of choosing high-quality brake pads:

Investing in high-quality brake pads is vital as they directly impact the safety and reliability of your vehicle's braking system. Opting for reputable brands and ensuring the pads meet or exceed industry safety standards can significantly enhance your driving experience. High-quality brake pads offer improved durability, reduced noise, and better stopping power. By prioritizing quality, you are not only safeguarding your own safety but also contributing to the overall safety of others on the road.

4. Overall responsibility as a driver:

Lastly, recognizing the importance of brake pad maintenance is part of being a responsible driver. Regularly checking and maintaining your brake pads not only ensures your own safety but also demonstrates consideration for other road users. By being proactive and attentive, you play a pivotal role in preventing potential accidents and promoting safe driving practices.

In conclusion, understanding the signs of deteriorating brake pads, seeking professional help when needed, choosing high-quality replacements, and taking responsibility for maintenance are all essential aspects of knowing if your brake pads are in good condition. By following these guidelines, you can ensure your brakes are reliable, promoting a safe driving experience for yourself and others on the road. So, don't underestimate the importance of well-maintained brake pads – they are your first line of defense in emergency situations. Stay vigilant, stay safe.